|
Custom Modified
Air Fuel Ratio Meter - High Turbo Applications |
|
|
Modified Air Fuel Ratio Meter Kit |
|
|
An accurate air Fuel Ratio Meter
is an absolute must if you are doing any kind of fuel related
performance upgrades to your car. Such as Supercharging, Increasing
Turbo Boost Settings, Adding Boost Controllers etc. This unit takes
the output from your existing Car's Oxygen Sensor and displays the
results on 10 LEDs. It lets you know whether your car is running at
it's optimum from an Air Fuel Ratio perspective. You can mount the
LEDs anywhere you like. They can be fitted right into the car's dash
board. The complete circuit board is so small it can easily be
concealed.
This Meter used in combination with our Fuel Injector Duty Cycle Meter
(Also available and described in another area of this site) gives you all the
information you need to ensure a perfectly tuned Air Fuel System. In
addition they look great on your car's dash.
This Modified Air fuel Meter is
calibrated to read the following O2 Sensor Voltages:
Please refer to the chart at the bottom of this page for detailed
information on the functionality.
If you are not handy with a soldering iron, you can order the complete
unit in a small slim enclosure that can be attached to your dash with
double sided tape.
Custom
Modified Gauges are also available on request for Turbo
Applications. You can select any voltage you like, with as many
indicators as you like. The Possibilities are endless. Please
email for details Here are comes examples:
-
0v - 0.9v - 0.09v Per Indicator
(This is the Standard Unit)
-
0.87v - 0.99v - 0.04v Per
Indicator 4 Indicators (Modified Air Fuel Meter)
-
0.55v - 1v - 0.05v Per Indicator
10 Indicators (Modified Air Fuel Meter)
-
0.90v - 1v - 0.05v Per Indicator
4 Indicators (Modified Air Fuel Meter)
-
0.58v - 0.94v - 0.04v Per
Indicator 10 Indicators (Modified Air Fuel Meter)
-
0.78v - 0.98v - 0.02v Per
Indicator 10 Indicators (Modified Air Fuel Meter)
Here is a nice photo of the finished tachometer mounted in
an Audi S4 the cluster ready
to go. If you click on the photo you will see it in action.

Sample Tachometer Installations in
the Audi S4 Cluster, Click on photo for In-Action Video
This unit is available in 3 configurations as follows, just click on
the title(s) to order:
|
Modified Air
Fuel Ratio Meter Complete in ABS Box ($70.00)
This is a Custom made completely
finished Air Fuel Meter mounted in a convenient compact black
enclosure approximately 3.1" x 1.6" x .7". The 10
Indicators can be
ordered in the size and color
combination of your choice comprising of 3mm or 5mm Colored Indicators,
3mm Clear Indicators,
in combinations of Red, Green Amber &
Yellow LEDs.
The default selection is; 3 Red, 3 Green, 2 Amber & 2 Yellow LEDs.
It comes complete with simple installation and operation
instructions. All you have to do is find a suitable location for
the meter, wire up the power and Oxygen (O2) Sensor signal wire
and your done! The actual enclosure may differ slightly from the
photos. Here are some examples of completed units.
|
|
 |
|
Sample of Unit
using 5mm Colored Indicators
|
|
|
|
|
|
Sample of Similar Unit
using 3mm Colored and Clear (Colored When Lit Up) Indicators
|
|
|
Dual Modified Air Fuel Meters, Two Independent Meters, in One Enclosure ($140.00)
This is a Custom made completely
finished Dual Air Fuel Meter (2 Independent Meters) mounted in one convenient compact black
enclosure approximately 3.1" x 1.6" x .7". The 20
Indicators can be
ordered in color
combination of your choice comprising of 3mm Colored Indicators,
3mm Clear Indicators,
in combinations of Red, Green Amber &
Yellow LEDs
The default selection is; 3 Red, 3 Green, 2 Amber & 2 Yellow LEDs.
It comes complete with simple installation and operation
instructions. All you have to do is find a suitable location for
the meter, wire up the power and Oxygen (O2) Sensors signal wires
and your done! The actual enclosure may differ slightly from the
photos. Here are some examples of completed units.
This unit is specifically designed to monitor both banks of a
V6 or V8 or V10 engine so you can compare readings on each bank.
|
|
|
|
 |
|
|
|
Sample of a Dual Units for
Monitoring both Banks of a Vxx Engine, 0.63v - 0.99v, 10 Indicators
per Bank
|
Custom Modified
Air Fuel Ratio Meters. (Price Depends on configuration)
This is a Custom made completely
finished Modified Air Fuel Meter mounted in one convenient compact black
enclosure approximately 3.1" x 1.6" x .7". The
Indicators can be
ordered in color
combination of your choice comprising of 3mm Colored Indicators,
3mm Clear Indicators,
in combinations of Red, Green Amber &
Yellow LEDs
The default selection is; 3 Red, 3 Green, 2 Amber & 2 Yellow LEDs.
It comes complete with simple installation and operation instructions.
All you have to do is find a suitable location for the meter, wire up
the power and Oxygen (O2) Sensors signal wires and your done! The
actual enclosure may differ slightly from the photos.
Custom Units can be configured to you own voltage
specifications. The following are examples but not limitations:
-
0v - 0.9v - 0.09v Per Indicator
(This is the Standard Unit)
-
0.63v - 0.99v - 0.04v Per
Indicator 10 Indicators (Modified Air Fuel Meter)
-
0.87v - 0.99v - 0.04v Per
Indicator 4 Indicators (Modified Air Fuel Meter)
-
0.55v - 1v - 0.05v Per Indicator
10 Indicators (Modified Air Fuel Meter)
-
0.90v - 1v - 0.05v Per Indicator
4 Indicators (Modified Air Fuel Meter)
-
0.58v - 0.94v - 0.04v Per
Indicator 10 Indicators (Modified Air Fuel Meter)
-
0.78v - 0.98v - 0.02v Per
Indicator 10 Indicators (Modified Air Fuel Meter)
|
|
|
|
Sample of a Quad Unit for
Monitoring all 4 Cylinders of a Race Car, 0.87v - 0.99v, 4 Indicators
per Bank
|
|
|
|
|
0.63 - 0.99v
Modified Air Fuel Ratio Chart |
|
|
LED No. |
Voltage |
Description |
A/F Ratio |
| 1 |
0.63v |
Very Lean |
14.6:1 |
| 2 |
0.67v |
Very Lean |
14.55:1 |
| 3 |
0.71v |
Lean (Vacuum) |
14.5:1 |
| 4 |
0.75v |
Lean (0 PSI) |
14.45:1 |
| 5 |
0.79v |
Low Boost |
14.4:1 |
| 6 |
0.83v |
Boost (2 - 6 PSI) |
14.1:1 |
| 7 |
0.87v |
Boost (6 - 9 PSI) |
13.5:1 |
| 8 |
0.91v |
High Boost (9 - 12 PSI) |
13.2:1 |
| 9 |
0.95v |
High Boost (+12 PSI) |
13.1:1 |
| 10 |
0.99v |
Very Rich |
12.5:1 |
|
|
Please note: A/F Ratios indicated are
approximations as this unit is so sensitive |
|
|
Payment
Methods:
PAYPAL
and Money
Orders are
the ONLY
method of payment accepted. Please use PAYPAL
to pay with your credit card. |